Free

Variation of Hickory-Smoked Beef Jerky

Published by Shannon Grendahl

The quick answer

Smoker Temp
180°F
Wood
Mesquite
Est. Cook Time
4 hr
Jump to RecipePlan Cook Schedule

Eye-of-round sliced thin, 24hr marinade, 4hr at 180°F.

Variation of Hickory-Smoked Beef Jerky
180°F4hServes 8Mesquite
Sign in to save
Tested by the Smoke Brothers Guild Test Kitchen. Calibrated-probe temperatures, USDA safe minimums and rest times checked. See our testing standards →

Cook Mode

One step at a time, big text, timers, and your screen stays awake. 0/9 steps done.

Ingredients

Tap to tick off · 0/21 gathered

8servings

Method

    Prep
  1. 30 min

    Begin by trimming any visible fat from the eye of round. Fat can go rancid quickly, spoiling your jerky. For easier slicing, partially freeze the beef for 30-60 minutes until firm but not solid. Slice the beef against the grain into uniform strips, about 1/8 to 1/4 inch thick. Against the grain slicing results in a more tender, less stringy jerky.

    Why it matters

    Uniform thickness ensures even drying, and slicing against the grain yields a more palatable chew.

    Common mistake

    Not removing all fat leads to rancid jerky. Slicing with the grain makes it tough to chew.

  2. 5 min

    In a large bowl, whisk together the soy sauce, Worcestershire sauce, brown sugar, black pepper, garlic powder, onion powder, smoked paprika, pink curing salt No. 1, and optional red pepper flakes until the sugar and salt are dissolved.

    Why it matters

    Thoroughly mixing the marinade ensures all flavors and the curing salt are evenly distributed.

    Common mistake

    Not dissolving the sugar and salt completely can lead to uneven flavoring and curing.

  3. Cure / Brine
  4. 24h

    Add the beef strips to the marinade, ensuring all pieces are fully submerged. Cover the bowl or transfer to a large Ziploc bag, remove as much air as possible, and refrigerate for 12-24 hours.

    Why it matters

    This step allows the flavors to penetrate the meat and the curing salt to work its magic, which is crucial for both flavor and food safety during the low-temperature smoke.

    Common mistake

    Not marinating long enough will result in bland jerky and inadequate curing.

  5. Pellicle / Dry
  6. 4h

    Pat the marinated strips dry and arrange without overlapping on wire racks. Refrigerate uncovered for 2–4 hours until slightly tacky.

    Why it matters

    A pellicle is a dry, sticky film on the meat's surface that helps smoke adhere better and promotes more even drying. It's crucial for good smoke penetration and proper dehydration.

    Common mistake

    Skipping this step, leading to jerky that takes longer to dry and has less smoke flavor.

  7. Smoker Setup
  8. 180°F20 min

    Preheat your pellet grill or smoker to a stable 180°F (82°C). Add mesquite wood pellets or chunks to the smoker box or hopper, as per your equipment's instructions. Ensure you have enough fuel for at least 4 hours of smoking.

    Why it matters

    Maintaining a consistent low temperature is key for drying the jerky without cooking it too fast. Mesquite wood provides a strong, traditional smoke flavor that pairs well with beef.

    Common mistake

    Not allowing the smoker to stabilize at the target temperature before adding meat, leading to fluctuating temperatures and uneven cooking.

  9. Smoke
  10. 180°F4h

    Place the racks in the 180°F smoker. Smoke approximately 3–4 hours, verifying at least 160°F inside the thickest strip. Use the following texture check to judge drying.

    Why it matters

    The low and slow smoking process dehydrates the meat while infusing it with flavor and ensuring food safety by reaching an internal temperature where pathogens are killed. Pliability indicates proper moisture content.

    Common mistake

    Overcooking to the point of brittleness or undercooking, which can lead to mold or spoilage.

  11. 180°F

    Begin checking the jerky after 2 hours, and then every 30 minutes. Jerky is done when it's dry and firm, but still pliable. When you bend a piece, it should crack but not break cleanly. There should be white fibers showing when bent and torn.

    Why it matters

    Properly dried jerky is essential for texture, flavor, and food safety. Under-dried jerky can spoil, while over-dried jerky becomes brittle and unpleasant to eat.

    Common mistake

    Removing jerky too early can lead to mold and spoilage; drying too long produces brittle, hard jerky.

  12. Rest
  13. 24h

    Cool the jerky completely on a wire rack. Transfer to an airtight container and refrigerate for 12–24 hours to equalize moisture.

    Why it matters

    Conditioning allows any remaining internal moisture to redistribute evenly throughout the jerky, preventing dry, brittle spots and ensuring a consistent texture. Burping prevents condensation that could lead to mold.

    Common mistake

    Skipping the conditioning step, leading to unevenly textured jerky with potential for quick spoilage.

  14. Serve
  15. Store airtight in the refrigerator for up to 1 month, or freeze for several months.

    Why it matters

    Proper storage maintains the quality, flavor, and safety of your homemade jerky, allowing you to enjoy it over time.

    Common mistake

    Improper storage, leading to rapid spoilage or loss of flavor and texture.

Sauce It

Smoking this for the weekend? Send this recipe to your crew.

Free 12-Page Guide

The Pitmaster Field Manual

Five core habits, meat and wood reference charts, rub formulas, and a printable cook log. Download the free manual and join the Guild email list for new recipes and techniques.

Cooks & Reviews

Guild members can rate this recipe, log their cooks and share photos.

Sign in to continue

Member reviews

No reviews yet — be the first to rate this cook.

Ask the Pitmaster about this recipe

Substitutions, scaling, technique, troubleshooting — get answers grounded in this cook.

Certified Pitmaster Members

Sign in to try the AI Pitmaster on Variation of Hickory-Smoked Beef Jerky. New members get 3 free questions.

Sign in to try

Comments(0)

Sign in to join the discussion.

Loading comments…